Product Specifications

Recording method
3-color exposure with OLED
Film used
FUJIFILM instax WIDE Instant Film (sold separately)
Number of films
10 films/pack
Image size
Supported image size
800 × 1260 dot
Printing resolution
12.5 dots/mm (318 dpi, 80 μm dot pitch)
Printing levels
256 levels per color (RGB)
Standard compliance: Bluetooth Ver. 4.2 (BLE)
Supported image format
Printing time
Image recording - photo output (fed out): Approximately 12 sec.
Approximate printing capacity
Approximately 100 prints (from full charge)
*The number of prints depends on the usage conditions.
Power supply
Lithium ion battery (internal type: not removable)
Charging time
Approximately 80 to 120 minutes (Charging time depends on the temperature and battery remaining level)
Power consumption
Approximately 3 W
Operating environment
Temperature: +5 oC to +40 oC Humidity: 20% to 80% (no condensation)
Main unit dimensions
139mm×127.5mm×33.7mm(excluding projecting parts)
Main unit mass
Approximately 340 g (excluding film pack)
Supplied accessory
USB cable (BOD700-101, Length: 30 cm)
Stand (1)
Strap (1)
Declaration of conformity
FCC_Declaration of conformity_FI022W(Link WIDE)
EU_Declaration of conformity_FI022W(Link WIDE)
UK_Declaration of conformity_FI022W(Link WIDE)

*Simulated Image. Development time approx. 90 sec.
*The instax prints depicted are for illustrative purposes only.
*The above specifications are subject to change for performance improvement.
*The colors, textures, and other characteristics of actual products might differ somewhat from their photos.
*The Bluetooth® wordmark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by FUJIFILM Corporation is under license.
*The text QR code is a registered trademark and wordmark of Denso Wave Incorporated.
*The image size may affect sharpness and graininess of the finished print.
*Depending on the file size and smartphone type, wireless communication may take a long time.
*The smartphone type and shooting condition may affect the color tone and quality of the finished print.
*The finished print may look different from the image viewed on the smartphone display.
*The smartphone screen images are simulated.
*QR code depicted is for illustrative purposes only.